PALLEON FIXE 120
PALLEON FIXE is an autonomous system for electronic dosing of foam concentrate in the existing water network (small and medium flow rates).
Technical features
| Pump flow range : | 120 lpm |
| Pump type : | Piston |
| Suction : | - 0.6 bar |
| Pressure : | 16 bar |
| Dosing range : | 0.5 to 6% |
| Water flow range (4") : | 100 to 5000 lpm |
| Power : | three-phase 380V - 50 hz |
| Product viscosity compatibility : | < 250 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018 |
| Product type : | Class B |
Operating principle
PALLEON FIXE starts up as soon as the battery master switch is turned on. Dosage begins by pressing the START/STOP button or at a distance from a control station. The + and – buttons allow for quick and easy selection of the desired additive concentration.
As soon as the system detects a water flow, PALLEON FIXE injects Class B foam under pressure, proportionally to the water flow.
Benefits
-
FULL DISPLAY • Water flow rate
• Concentration
• Product tank level with capacity
• Dosage selection
• Intervention report -
UNIT • 128 x 64 display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature
between -20°C and +50°C -
ADAPTABLE • Secondary screen option is possible
• Several languages available -
INTUITIVE • Easy start-up
• Didactic screen
• Automatic flushing -
UPGRADABLE • External suction
• Product tank filling from the ground
• Injection on LP or HP system -
HIGH PERFORMANCE Injecting the product under pressure means PALLEON FIXE can be used whatever the water flow rate and pressure. Pre-mixing is performed in the truck without any pressure loss this allows fireman deployment to be far from the danger zones.
