PALLEON is an automatic dosing system fire vehicles using only CLASS B foam. PALLEON is a low volume positive injection device with automatic regulation of dosing compared to a range of variable water flow.
PALLEON HV is a system suitable for vehicles fitted with a low pressure water pump (12 bar) allowing an injection of up to 30 lpm of a product at concentrations between 0.5 and 6%.
Technical features
| Pump flow range : | 0.6 to 30 lpm |
| Pressure : | 12 bar |
| Dosing range : | 0.5 to 6% |
| Water flow rate (2"1/2) : | 50 to 2000 lpm |
| Power : | Electricity 24V - 95 A |
| Pump type : | Gear |
| Suction : | -0.7 bar |
| Priming : | Manual |
| Product type : | Class B |
| Product viscosity compatibility : | < 400 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018 |
Operating principle
The PALLEON HV is put into service as soon as the battery cut-off is engaged. The dosage is started by pressing the START / STOP key. The + and - buttons allow quick and easy selection of the desired concentration of foam concentrate.
PALLEON HV injects the foam concentrate under pressure as soon as a lance is opened, in proportion to the water flow. The rinsing takes place automatically at the end of the operation.
Screen benefits
-
UNIT • 128 x 64 display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature between -20°C and +50°C -
FULL DISPLAY • Water flow rate
• Concentration
• Product tank level with capacity
• Dosage selection
• Intervention report -
ADAPTABLE • Secondary screen option is possible
• Several languages available
System benefits
-
INTUITIVE • Easy start-up
• Didactic screen
• Automatic flushing -
HIGH PERFORMANCE Injecting the product under pressure means PALLEON can be used whatever the water flow rate and pressure. Pre-mixing is performed in the truck without any pressure loss this allows fireman deployment to be far from the danger zones.
-
FUNCTIONAL • Can be fitted on all types of vehicles
• Delivered in a pre-mounted kit
• Compatible with all Class B products
• Easy to install
• Operating temperature between -20°C and +50°C
• Light weight and compact size
• Easy maintenance -
UPGRADABLE • External suction
• Product tank filling from the ground
• Injection on LP or HP system -
EFFECTIVE The use of class B product makes fire extinguishing more effective and reduces firefighter intervention time.
The possibility of injecting the product directly from an external container increases the autonomy of the dosage system.
Installing tanks for class B product directly on the vehicle combined with the tank filling function reduces product handling.
