FURCIFER is an automatic dosing system for high-power fire vehicules using only CLASS B foam. FURCIFER is a device type "Around the pump" , injecting CLASS B foam with automatic regulation of dosing compared to variable water flow and a concentration defined by the user on the control screen.
FURCIFER 600 is a system adapted to vehicles equiped with a water pump low pressure (15 bar) to inject up to 600 l/min of foam with a concentration between 1 and 6%.
Technical features
| Dosing range : | 1 to 6% |
| Foam concentrate flow range : | 60 to 600 lpm |
| Water flow rate (6") : | 350 to 10000 lpm |
| Suction : | -0.2 bar |
| Pressure : | 15 bar |
| Product viscosity compatibilty : | < 120 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018 |
Operating principle
The FURCIFER starts up as soon as the battery master switch is turned on.
Selecting a concentration associated with the opening of a nozzle allows to inject the foam concentrate through eductor fitted on the water pump.
A motorized valve automatically regulates the volume of foam concentrate proportionally to water flow.
The system is in the standby when the nozzle is closed.
Pressing the «STOP» button stops the dosage and starts an automatic flushing cycle.
Screen benefits
-
ADAPTABLE • Customisable icons
• Secondary screen option is possible
• Download intervention report by bluetooth
• Several languages available -
MONITORING • Intervention report
• Fault log -
UNIT • Colour screen
• 6’’ display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature between -20°C and +50°C -
FULL DISPLAY • Water flow rate
• Actual concentration
• Pre-defined concentration icons
• Product tank levels with capacity
• Autonomy
System benefits
-
NO FOAM PUMP FOR PRESSURIZING THE FOAM CONCENTRATE
-
HIGH PRECISION ELECTRONIC FOAM DOSAGE
-
HIGH RELIABILITY
-
EFFECTIVE
-
ECONOMICAL
-
FUNCTIONAL
-
REDUCED SIZE OF COMPONENTS
