CAMELEON AB IQ is an automatic dosing system for small and medium size fire fighting vehicles using wetting / foaming agent (CLASS A) and foam concentrate (CLASS B). CAMELEON AB IQ is a low volume pressurized additive or foam concentrate injection device with automatic dosing regulation with respect to a variable water flow range and a concentration defined by the user on the control touch screen.
CAMELEON AB IQ HF is a system suitable for vehicles fitted with a low pressure water pump (12 bar) allowing two injections of up to 36 lpm of 2 different products at concentrations between 0.1 and 6%.
|Pump flow range :||0.6 to 36 lpm|
|Pressure :||12 bar|
|Dosing range :||0.1 to 6%|
|Water flow range (3 :||80 to 3000 lpm|
|Power :||Electricity 24V - 95 A|
|Pump type :||Piston|
|Suction :||-0.15 bar|
|Product viscosity compatibility :||< 120 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018|
|Product type :||Class AB|
The CAMELEON AB IQ is put into service as soon as the battery switch is activated. The selection of the type of intervention allows the start of the dosage with the desired concentration. The CAMELEON AB IQ automatically prime the pump and injects the product into the pipe, in proportion to the water flow. The injection of the product under pressure allows a very rapid production of foam as soon as the lance is opened. The rinsing takes place automatically at the end of the operation.See the Diagram of operation
• Customisable icons
• Remote start-up
• Secondary screen option is possible
• Download intervention report by bluetooth
• Several languages available
• CAN Open external link
• Colour touch screen
• 7’’ display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature between -20°C and +50°C
• Water flow rate
• Actual concentration
• Dosage icons
• Foam injection pressure
• Product tank levels with capacity
• Intervention report
• Fault log
• Training mode
• Easy start-up
• Didactic touch screen
• Frost protection
• Can be fitted on all types of vehicles
• Delivered in a pre-mounted kit
• Compatible with all Class A and B products
• Easy to install
• Light weight and compact size
• Easy maintenance
• External suction
• Product tank filling from the ground
• Dosage of up to 4 differents products
• Several possible injection points
HIGH PERFORMANCE Injecting the product under pressure means CAMELEON AB IQ HF can be used whatever the wate flow rate and pressure. Pre-mixing is performed in the truck without any pressure loss this allows fireman deployment to be far from the danger zones.
The use of class A and B products makes fire extinguishing more effective and reduces firefighter intervention time.
The possibility of injecting the product directly from an external container increases the autonomy of the dosage system.
Installing tanks for class A and B products directly on the vehicle combined with the CAMELEON AB IQ HF's tank filling function reduces product handling.
A training mode allows the equipment to be tested without foam use.
CAMELEON AB IQ HF dosing accuracy considerably reduces the amounts of product used during operations.
Quicker extinguishing means less water consumption.