SALAMANDRE is an electronic metering system to protect industrial sites requiring large self-extinguishing foam solution. SALAMANDRE is a high volume positive injection device with an automatic regulation, compared to variable water flow and a concentration defined by the user on the control screen.
SALAMANDRE IQ 240 is a system with thermal drive for injection up to 240 l/min in a product water line has multiple input/output and at concentrations between 1 and 6%.
|Pump flow range :||12 to 240 lpm|
|Pump type :||Piston|
|Suction :||-0.6 bar|
|Pressure :||16 bar|
|Dosing range :||1 to 6%|
|Water flow range (5") :||300 to 8000 lpm|
|Inlet / outlet manifold :||On demand|
|Product viscosity compatibility :||< 220 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018|
|Product type :||Class B|
As soon as the thermal engine is started up, the pump draws up the foam concentrate via the recycling tank.
If dosing is not requested, the liquid circulates in a closed loop.
When a dosage concentration is activated, SALAMANDRE IQ injects the foam concentrate into the water pipe and automatically adjusts the volume of foam concentrate via a regulation valve.
The amount of foam concentrate injected depend of the real time water flow rate and the desired concentration.
At the end of the operation, the circuit is cleaned by a simple press on the "FLUSHING" button.
• Intervention report
• Fault log
• Customisable icons
• Remote start-up
• Several languages available
• Colour touch screen
• 7’’ display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Operating temperature between -20°C and +50°C
• Water flow rate
• Actual concentration
• Pre-defined concentration icons
• Water pressure and product injection pressure
• Product tank levels with capacity
Injecting the product under pressure means SALAMANDRE IQ can be used whatever the water flow rate and pressure. This makes it possible to use considerable lengths of hose line.
SALAMANDRE IQ can therefore be placed anywhere along the discharge lines, allowing deployment considerably further away from the danger zone. Operations to supply foam concentrate are more easy and safe.
DIDACTIC SALAMANDRE IQ uses various embedded sensors to continuously display the status of the system on the screen. This provides didactic assistance enabling the user to monitor the stages of system start-up.
• Compatible with all Class B foam concentrates
• Stand-alone system
• Can be adapted for a fixed mount (skid) or mobile mount (trailer)
• Various drive motors
• High level of autonomy
• Easy maintenance
• External suction
• Product tank filling from the ground
• Product tank agitation
• Foam transfer to an external container
• Emergency operating mode
• Battery floating charger
TAILOR-MADE Each model has an operating range adapted to the needs of the spray apparatus and the types of risks. The size of the pre-mix manifold is tailored according to the needs of the number of inlets/outlets (type and size of connections).
EFFECTIVE CLASS B foam concentrate use on industrial fires means extinguishing will be faster and easier to cool down more effectively burning areas. The possibility of injecting the product directly from an external stock increases the autonomy of the dosing system and allows foam to be continuously produced at a perfectly controlled concentration.