TRITON is an automatic dosing system fire vehicles using only CLASS A foam. TRITON is a low volume positive injection device with automatic regulation of dosing compared to a range of variable water flow.
TRITON HP is a system adapted to vehicles equiped with a water pump high pressure (45 bar) to inject up to 3 l/min of foam with a concentration between 0.1 and 1%.
|Pump :||0.1 - 3 l/min|
|Pressure :||45 bar|
|Dosage :||0.1 to 1%|
|Water flow rate (DN40) :||35 - 350 l/min (other flow rates possible)|
|Power supply :||Electricity 24VDC - 16A (other voltages possible)|
|Foam :||Foam Concentrate Class A|
TRITON starts up as soon as the battery master switch is turned on. Dosage begins by pressing the START/STOP button. The + and - buttons allow for quick and easy selection of the desired additive concentration.
Positive injection TRITON system inject CLASS A foam according to real time waterflow as soon as a nozzle is open. TRITON does not require flushing after use.
• Optional secondary screen
• Several languages available
• Water flow rate
• Actual concentration
• Product tank levels with pressure
• Dosage selection
• Intervention report
• 128 x 64 display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature between -20°C et +50°C
• Quick start-up
• Instantaneous production of foam
• No require flushing
EFFECTIVE The use of class A product makes fire extinguishing more effective and reduce fire fighter intervention time.
• Delivered in a pre-mounted kit
• Can be fitted on all types of vehicles
• Compatible with all Class A additives
• Easy to install (new vehicles or vehicles already in service)
• Light weight and compact size
• Easy maintenance
HIGH PERFORMANCE Injecting the product under pressure means TRITON can be used whatever the water flow rate and pressure. Pre-mixing is performed in the truck without any pressure loss this allows fireman deployment to be far from the danger zones.
ECONOMICAL Quicker extinguishing means less water consumption.